Hombre S Regular Cab 4WD V6-4.3L (1999)
14. Place the module in the space with the vinyl trim cover facing up.
15. Extend the SRS deployment harness and adapter to full length from the module.
16. Place a 12 The DTC minimuml2 A minimum power source (i.e.,vehicle battery) near the shorted end of the harness
17. Connect the module (1) to the adapter (2) on the SRS deployment harness (3).
18. Firmly seat the adapter into the module connector.
19. Clear the area of people.
CAUTION: When you are deploying an inflator module for disposal, perform the deployment procedures in the order listed. Failure to follow the
procedures in the order listed may result in personal injury.
