Hombre S Regular Cab 4WD V6-4.3L (1999)
Malfunction Lamp / Indicator: Testing and Inspection
Warning Lamp Does Not Come "ON"
Circuit Description
When the ignition switch is first turned to the RUN position, the GAUGES fuse applies battery voltage to the AIR BAG warning lamp. The AIR BAG
warning lamp is connected to the Air Bag Indicator Control, terminal 7. The SIR fuse applies battery voltage to the IGNITION 1 input, terminal 10. The
supplemental restraint sensing and diagnostic module (SDM) responds by flashing the AIR BAG warning lamp 7 times.
When measurements are requested in this table, use J 39200 Digital Multimeter with the correct terminal adapter from J 35616-A Connector Test
Adapter Kit. When an inspection for proper connection is requested, refer to Intermittents and Poor Connections. When a wire, connector or terminal
repair is requested, use J 38125-B Terminal Repair Kit and refer to Wiring Repair.