isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Technician Safety Information|Page 5682 > < Technician Safety Information|Page 5680
Page 5
background image

airbags could accidentally deploy and cause damage or injuries.

WARNING:
Do not use test equipment on the yellow SRS wires and connectors in the steering column, console, dashboard, and floor. You could
unintentionally set off the airbags, which could cause injury to you and others.

While working on other systems, be careful not to damage SRS wiring or components. Damage could make the airbags inoperative, which
could lead to the driver's or the passenger's injury or death it the car were in a severe frontal collision.

Wiring

Never attempt to modify, splice or repair SRS wiring.

NOTE:  SRS wiring can be identified by special yellow outer protective covering.

Be sure to install the harness wires so that they are not pinched or interfering with other parts.

Make sure all SRS ground locations are clean and grounds are securely fastened for optimum metal-to-metal contact. Poor grounding can cause
intermittent problems that are difficult to diagnose.

Technician Safety Information|Page 5682 > < Technician Safety Information|Page 5680