Hombre S Regular Cab 4WD V6-4.3L (1999)
Important: Utilize the following procedures in the event that sensor mounting holes or fasteners are damaged to the extent that the sensor may no
longer be properly mounted.
6. Remove the supplemental restraint front end discriminating sensor from the vehicle.
7. Perform the following steps in order to complete the first fastener repair:
1. Remove and discard the improperly installed rivet.
2. Reattach the sensor with new rivet.
8. Perform the following steps in order to complete the second fastener repair:
1. Remove the improperly installed rivet.
2. Enlarge the mounting holes in the lower radiator support to 9.0 mm (0.35 in).
3. Insert and properly seat the rivet.
NOTE: Refer to Fastener Note in Service Precautions.
4. Install sensor with screw.
Tighten: Tighten fasteners to 8.0 N.m (71 lb in).
Installation Procedure
1. Install the supplemental restraint front end discriminating sensor to the lower radiator support surface ensure that the arrow is pointing toward the
front of the vehicle.
