Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Install a new seal, sending assembly and lock Ring. Make sure the lock Ring alignment holes fit over the tabs on the tank.
2. Install the cam lock assembly. Turn the cam lock clockwise to lock it.
3. Install the fuel tank.
4. Add fuel removed from the tank.
5. Connect the negative battery cable.
6. Check for fuel leaks.
1. Turn the ignition ON for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Again, turn the ignition switch to the ON position.
4. Check for fuel leaks.