Hombre S Regular Cab 4WD V6-4.3L (1999)
2.
Remove the harness from the crankshaft position sensor (figure 1).
3.
Remove the sensor hold down bolt (figure 1).
4.
Remove the old sensor and replace with new sensor.
IMPORTANT:
When installing or removing a crankshaft position (CKP) sensor make sure that the mounting surfaces are clean and free of burrs before installing the
CKP sensor and is fully seated and held stationary in the front cover before applying the torque settings to the hold down bolt. A sensor, which is not
seated may result in erratic operation and may lead to setting false codes. Also, Lube the new o-ring with clean engine oil before installing.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
Use the published labor operation as shown.
Labor Time includes administrative time allowance.