Hombre S Regular Cab 4WD V6-4.3L (1999)
3. Determine the toe (3) from the alignment equipment.
4. Loosen the tie rod adjuster clamp bolts at each end to the tie rod adjuster sleeve.
5. Adjust the toe by turning the tie rod adjuster in order to achieve the proper toe specification
6. Position the tie rod adjuster clamps.
Tighten
Tighten the tie rod adjuster clamp bolts to 25 N.m (18 lb ft).
7. Verify the number of threads showing on the tie rod ends at each side of the adjuster sleeve are equal within three threads.
