Hombre S Regular Cab 4WD V6-4.3L (1999)
7. Insert the rack piston balls through the ball return guide hole (1 )while turning worm shaft (2) counterclockwise in order to install the rack piston
balls into the rack piston.
8. Install the remaining rack piston balls (3) into the ball guide (1) using grease at each end (2) to retain the rack piston balls (3).
9. Install the ball guide (5) to the rack piston (4).
10. Install the ball guide clamp (6).
11. Install the screws (7).
Tighten
Tighten the screws (7) to 58 N.m (43 lb in).
12. Insert J 21552 into the bore of the rack piston while turning the worm shaft counterclockwise. The turning of the worm shaft forces the rack piston
onto
13. Install the flat races (2) (4)and the thrust bearing (3) onto the worm shaft (1).