Hombre S Regular Cab 4WD V6-4.3L (1999)
Align the check valve (1) from the steering gear housing (2) using a small screwdriver.
Assembly Procedure
Install the check valve (1) using a318 inch diameter piece of tubing 100 mm (4 inches) long to drive into the steering gear housing (2).
Thrust Support Replacement
Thrust Support Replacement
Disassembly Procedure
Tools Required
-
J 42852 Adjuster Nut Socket
-
J 6222-A Shaft Seal Protector
Important: Place J 6222-A over the stub shaft end before removing or replacing the adjuster nut assembly and the thrust support assembly.
