Hombre S Regular Cab 4WD V6-4.3L (1999)
3. Turn the adjuster nut assembly (1 )clockwise using J 42882 until the adjuster nut assembly (1) and the thrust support assembly (2)are firmly
bottomed in the steering gear housing (3).
Tighten
Tighten the adjuster nut assembly (1) to 28 - 31 N.m(20 - 23 lb ft).
4. Place an index mark (1) on the steering gear housing (4) parallel with one of the holes (3)in the adjuster nut assembly (2).
5. Measure back counterclockwise 13 mm(1/2 inch).
6. Place a second mark (2) on the steering gear housing (1).