Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Remove the outer tie rod ball stud from the steering knuckle using J 6627-A.
6. Remove the inner tie rod ball stud from the relay rod using J 6627-A.
7. Perform the following steps in order to remove the tie rod ends from the adjuster tube:
1. Loosen the clamp bolts.
2. Unscrew the assemblies.
8. Inspect for the following possible conditions:
-
The tie rod ends for damage
-
The tie rod end seals for excessive wear
-
The tie rod threads for damage
-
The tie rod end for damage
-
The bail stud threads for damage
-
The adjuster tube for bending
-
The adjuster tube for damaged threads
9. Clean the following components:
-
The ball stud threads
-
The ball stud nut