Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Install the stabilizer shaft to the rear axle.
2. Install the following parts:
-
The insulators
-
The clamps
-
The U-bolts
3. Install the nuts to the U-bolts.
Tighten
Tighten the U bolts nuts to 60 N.m (44 lb ft
4. Install the stabilizer shaft to the link mounting bolt.
5. Install the stabilizer shaft to the link nut.
Tighten
Tighten the upper link nut to 35 N.m (25 lb ft).
6. Lower the vehicle.