Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Secure the spring with a chain around one of the top spring coils to the upper control arm.
6. Turn the steering wheel to one side in order to allow the steering Linkage to clear the lower control arm front pivot bolt.
7. Remove the lower control arm pivot bolts and nuts.
1. Take the lower control arm rear pivot bolt out.
2. Take the lower control arm front pivot bolt out.
8. Lower the control arm by lowering the jack.
9. When compression is removed from the coil spring, take the chain away.
10. Remove the coil spring and the insulators. While removing the coil spring, do not apply force to the lower control arm and ball joint.
11. Position the coil spring properly for easy removal.
Installation Procedure
Tools Required
-
J 23028-01 Coil Spring Remover and Installer
