Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Install the following parts:
-
The frame to the spring shackle bolt
-
The washers
-
The frame to the spring shackle nut
Do not tighten the nut.
6. Repeat steps 1 through 6 for the other spring shackle bushing.
7. Support the axle so that there is a distance of 164 mm to 176 mm (6.46 in to 6.94 in) between the axle tube and the metal surface of the bumper
bracket (1).
Tighten
Tighten the rear spring shackle nuts to 122 N.m (89 lb ft).
8. Raise the exhaust system and connect the rear exhaust hangers, if necessary.
9. Install the spare tire.
10. Remove the rear axle support.
11. Lower the vehicle.