Hombre S Regular Cab 4WD V6-4.3L (1999)
Torsion Bar: Service and Repair
Torsion Bar and Support Assembly Replacement
Removal Procedure
Tools Required
-
J 36202 Torsion Bar Loading/Unloading Tool
1. Raise and support the vehicle with safety stands.
2. Unload both torsion bars using J 36202. To aid in assembly, record the number of turns the tool makes when removing the adjusting bolt. Remove
J 36202.
3.
Remove the lower link mount nut from one side.
4. Remove the torsion bars. Note the exact direction of the forward end and the side of the torsion bar that is being removed.
5. Remove the lower link mount nut from the opposite side.
6. Remove the lower link mount.