Hombre S Regular Cab 4WD V6-4.3L (1999)
Shift Cable: Service and Repair
Shift Cable Replacement
Removal Procedure
1. Apply the parking brake.
2. Shift the transmission into neutral.
3. Remove the steering column filler panel.
4. Remove the door sill trim plate.
5. Remove the cowl side trim panel.
6. Remove the seat from vehicle.
7. Remove the retainer securing the shift cable to the steering column.
Important: The removal of the shift cable from the floor shift control is similar to the removal of the shift cable from the column shift control.
8. Remove the shift cable end from the steering column shift bracket.
9. Remove the nut securing the shift cable and the clip to the pedal bracket.
10. Remove the grommet and tape securing the shift cable to floor panel.
11. Raise and support the vehicle.
