Hombre S Regular Cab 4WD V6-4.3L (1999)
Center Support: Service and Repair
CENTER BEARING REPLACEMENT
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the two-piece propeller shaft.
3. Remove the center bearing.
-
Stand the propeller shaft on end in a press with the center bearing supported by press bars.
-
Press the propeller shaft down and off the center bearing.
Installation Procedure
1. Install the center bearing onto the propeller shaft by pressing the center bearing onto the shaft using a press.
2. Install the two-piece propeller shaft.
3. Remove the safety stands and lower the vehicle.