Hombre S Regular Cab 4WD V6-4.3L (1999)
9. Spread the spacer rings using J 8059 (or equivalent) to remove the spider assembly.
10. Remove the following items:
-
The spacer ring (1)
-
The spider assembly (2)
-
The second spacer ring (3)
-
The tripot boot (4)
11. Clean the halfshaft bar. Use a wire brush to remove any rust in the boot mounting area (grooves).
12. Inspect the following items:
-
The needle rollers
-
The needle bearings
-
The trunnion
13. Check the tripot housing for unusual wear, cracks, or other damage.
14. Replace any damaged parts.
Assembly Procedure
Tools Required
-
J 41048 Swage Clamp Tool
-
J 35566 Large Seal Retaining Clamp Tool