Hombre S Regular Cab 4WD V6-4.3L (1999)
Important:
If replacing the engine flywheel note the position of the original balance weights (if applicable). Balance weights must be installed into the new
engine flywheel in the same location.
Note the position of the engine flywheel balance weights and install the engine flywheel balance weights as required.
A properly installed engine flywheel balance weight will be flush or slightly below flush with the face of the engine flywheel.
1. Install the engine flywheel to the crankshaft.
2. Align the locator hole to the pin.
3. Install the engine flywheel bolts.
Tighten the engine flywheel bolts in sequence to 100 N.m (74 lb ft).
4. Install the clutch assembly.
5. Install the transmission.
