Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Install the wiper arm assembly onto the wiper transmission drive shaft.
1. Align the wiper arm assembly with the marks made on the windshield.
2. Push the wiper arm assembly down onto the wiper transmission drive shaft completely.
2. Install the retaining nut onto the wiper transmission drive shaft and the wiper arm assembly.
Tighten
Tighten the nut to 23 N.m (17 lb ft)
3. Install the cover on the wiper arm assembly over the nut.
Inspection Procedure
Perform the System Check.