Hombre S Space Cab 2WD V6-4.3L (2000)
2. Install the 5 blower motor and fan assembly mounting bolts (2).
Tighten
Tighten the bolts to 4.5 N.m (40 lb in).
3. Connect the electrical connectors (1).
4. Connect the cooling tube to the blower motor.
5. Install the rear coolant recovery reservoir mounting studs.
6. Install the coolant reservoir. Refer to Coolant Recovery Reservoir Replacement in Engine Cooling.
7. Install the VCM or the PCM. Refer to the appropriate procedure:
-
PCM Replacement/Programming in Engine Controls - 2.2L
-
VCM Replacement/Programming in Engine Controls - 4.3L
8. Perform the heater output temperature check. Refer to Heater Output Temperature Check