isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Technician Safety Information|Page 5081 > < Technician Safety Information|Page 5079
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

DISARMING

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the LOCK position.
3. Remove the key from the ignition switch.
4. Remove the AIR BAG fuse from the fuse block.
5. Remove LH I/P sound insulation. 
6. Remove LH Knee bolster.
7. Remove the Connector Position Assurance (CPA) from the yellow 2-way connector at the base of the steering column.

Important:  The AIR BAG warning lamp will turn on when the AIR BAG fuse is removed, and the ignition switch is ON. This is normal operation, and
does not indicate an Supplemental Restraint System (SRS) malfunction.

8. Disconnect the yellow 2-way connector.

ARMING

Technician Safety Information|Page 5081 > < Technician Safety Information|Page 5079