Hombre XS Space Cab L4-2.2L CPC (1997)
Electronic Brake Control Module: Service and Repair
Electronic Brake Control Module
Electronic Brake Control Module (EBCM)
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Four electrical connectors.
3. Four T-25 Torx bolts.
4. Electronic Brake Control Module (EBCM) from Brake Pressure Modulator Valve (BPMV). A light amount of force may be necessary to remove
the EBCM.
NOTE:
^
Do not pry on the EBCM or BPMV with a mechanical aid. Excessive force will cause damage to the EBCM.
^
Do not reuse the EBCM gasket or mounting bolts. Always install a new gasket, and mounting bolts with a new EBCM.
^
Clean Top of the BPMV with a clean, dry cloth.
INSTALL OR CONNECT
1. New EBCM gasket onto BPMV.
NOTE: Do not use RTV or any other type of sealant on the EBCM gasket or mating surfaces.
2. EBCM to BPMV.
^
Inspect Gasket for correct alignment.
3. Four new EBCM bolts.
^
Tighten Four bolts to 5 Nm (39 inch lbs.) in an X pattern.
4. Four electrical connectors.
5. Negative battery cable.
6. Verify bulb check.
7. Revise tire calibration using Scan Tool.