Hombre XS Space Cab L4-2.2L CPC (1997)
Brake Pad: Service and Repair
Removal and Installation
Original brake lining material is recommended for this vehicle to maintain the balance between the front and rear brake performance. GM replacement
brake parts have been carefully selected to provide the proper brake balance for the purposes of stopping distance and control over the full range of
operating conditions. Installation of front or rear brake lining material with performance characteristics different from the recommended replacement
parts can change the intended brake balance for this vehicle.
Disc Brake Linings
REMOVE OR DISCONNECT
1
Brake caliper.
^
You do not need to disconnect the brake hose.
2. Suspend the caliper.
NOTE: Do not allow brake components to hang from the flexible hoses, Damage to the hoses could result
3. Caliper mounting bracket (if required)
4. Inboard pad.
5. Retainer spring.
6. Outboard pad.
INSTALL OR CONNECT
1. Caliper mounting bracket
^
Tighten bolts to 110 Nm (81 ft. lbs.).
2. Outboard pad.
3. Retainer spring to the inboard pad.
4. Inboard pad.
5. Brake caliper.
NOTE:
^
Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.
