Hombre XS Space Cab L4-2.2L CPC (1997)
Removing Reservoir
7. Secondary piston.
^
With the rear port plugged, apply a small amount of air pressure to the front port.
8. Seals.
9. Spring retainer and spring.
^
Clean
^ All metal parts in denatured alcohol.
^ All rubber parts in clean brake fluid.
^
Inspect
^ Diaphragm for cuts, cracks, or a swollen condition.
^ Cylinder bore for scoring or corrosion. If corrosion is present, replace the cylinder. Do not attempt to hone the bore.
^ Reservoir for cracks.
INSTALL OR CONNECT
^
Lubricate the grommets, seals, and cylinder bore with clean brake fluid.
^
Use new seals when assembling the master cylinder.
1. Spring and spring retainer.
2. Seals on the secondary piston.
3. Secondary piston.
4. Primary piston assembly.
5. Snap ring.
^
The primary piston must be compressed when installing the snap ring.
6. Grommets.
^
Use new grommets when assembling the master cylinder.
Installing The Reservoir
7. Reservoir.
^
Press on the body while using a rocking motion.
8. Diaphragm in cover.
