isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Parking Brake Warning Switch > < Parking Brake Lever|Specifications|Page 3918
Page 2
background image

Front Cable And Lever

INSTALL OR CONNECT

1. Cable to lever.
2. Lever assembly.
3. Bolts.

^

Tighten bolts to 25 Nm (18 ft. lbs.).

4. Retainer.
5. Release handle.
6. Screw to parking brake switch.
7. Left side sound insulator panel.

ADJUST

1. Block the front wheels.
2. Raise and support the rear axle with safety stands.
3. Loosen the equalizer nut.
4. Fully release the parking brake pedal. 
5. Tighten the equalizer nut until the rear wheels will not rotate without excessive force in a forward direction.
6. Loosen the equalizer nut until there is little or no drag when the rear wheels are rotated in a forward direction.
7. Lower the vehicle.
8. Remove the blocks from the front wheels

Parking Brake Warning Switch > < Parking Brake Lever|Specifications|Page 3918