Hombre XS Space Cab L4-2.2L CPC (1997)
^
Tighten the lower intake manifold bolts to 30 Nm (22 ft. lbs.) in sequence.
5. Install the PCV valve pipe.
6. Connect the vacuum hoses to the throttle body.
7. Install the electrical wiring harness to the upper intake manifold stud/nuts.
8. Install the retaining nuts.
9. Install electrical connections for the following components:
^
MAP sensor
^
IAC valve
^
TPS
10. Install the Manifold Absolute Pressure sensor.
11. Install the throttle cable mounting bracket to the throttle body.
^
Tighten the throttle cable mounting bracket bolts to 25 Nm (18 ft. lbs.).
12. Install the A/C line to the evaporator housing. Refer to Heating and Air Conditioning.
13. Charge the A/C system. Refer to Heating and Air Conditioning.
14. Install the air cleaner assembly.
15. Connect the negative battery cable.
Lower
REMOVAL
1. Remove the upper intake manifold.
2. Drain the cooling system.
3. Remove the upper radiator hose from the thermostat housing and the radiator. Refer to Cooling System.
4. Remove the heater hose from the thermostat housing and the heater core. Refer to Heating and Air Conditioning.
5. Remove the vacuum hose from the fuel pressure regulator.
