isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Replacement|Page 1337 > < Replacement|Page 1335
Page 5
background image

^

Tighten the lower intake manifold nuts to 33 Nm (24 ft. lbs.) in sequence.

4. Install the brace from the generator to the lower intake manifold.
5. Install the spark plug wires to the spark plugs.
6. Install the electrical connectors to the fuel injectors.
7. Install the fuel pipe to the fuel rail.
8. Install the fuel pressure regulator to the lower intake manifold.
9. Install the fuel pipe to the fuel pressure regulator.

10. Install the vacuum hose to the fuel pressure regulator.
11. Install the upper intake manifold to the lower intake manifold.
12. Install the heater hose from the heater core to the upper thermostat housing. Refer to Heating and Air Conditioning.
13. Install the upper radiator hose to the upper thermostat housing to the radiator. Refer to Cooling System.
14. Fill the cooling system.
15. Install the air cleaner assembly.
16. Connect the negative battery cable.

Replacement|Page 1337 > < Replacement|Page 1335