isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Dimmer Switch > < Technician Safety Information|Page 5244
Page 2
background image

1. Connect the yellow 2-way connector at the base of the steering column.

2. Install the Connector Position Assurance (CPA) to the yellow 2-way connector.
3. Install LH Knee bolster.
4. Install LH I/P sound insulator.
5. Install the AIR BAG fuse to the fuse block.
6. Staying well away from the supplemental restraint steering wheel inflator module turn the ignition switch to the RUN position.

a. The AIR BAG warning lamp will flash seven times.
b. The AIR BAG warning lamp will then turn OFF.

7. Perform the SRS Diagnostic System Check if the AIR BAG warning lamp does not operate as described.

Dimmer Switch > < Technician Safety Information|Page 5244