isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Seat Belt Reminder Buzzer|Description and Operation|Page 5311 > < Fuel Level Buffer Module <--> [Fuel Gauge Module]|Locations|Page 5307
Page 1
background image

Seat Belt Reminder Buzzer: Description and Operation

This vehicle utilizes an enhanced seat belt warning system. This system activates a warning lamp for about 75 seconds and a buzzer for about 8 seconds
when the ignition switch is turned to the "RUN" position and the driver's seat belt is not buckled. The warning lamp will be constant for the first 20
seconds
, then flash for the remaining 55 seconds. The buzzer only turns on, and will stay on when the driver's seat belt is not fastened during the 8
second
 time period. The warning lamp and buzzer sequence of operation is as follows:

1. DRIVER'S SEAT BELT UNBUCKLED-Turn the ignition switch to the "RUN" position. The warning lamp illuminates constantly for 20 seconds,

then flashes for the remaining 55 seconds. The buzzer turns on and stays on for 8 seconds, then turns off. If the driver's seat belt buckle is buckled
before the 8 seconds is over, the buzzer will turn off and the lamp will remain on for the balance of the time delay.

2. DRIVER'S SEAT BELT BUCKLED-Turn the ignition switch to the "RUN" position. The warning lamp will turn on and the buzzer stays off. At

the end of 75 seconds the warning lamp turns off. If the driver's seat belt buckle is unbuckled prior to 8 seconds, the buzzer will turn on for the
balance of the 8 second delay.

Seat Belt Reminder Buzzer|Description and Operation|Page 5311 > < Fuel Level Buffer Module <--> [Fuel Gauge Module]|Locations|Page 5307