Hombre XS Space Cab L4-2.2L CPC (1997)
Marker Lamp: Service and Repair
Remove or Disconnect
^
Make sure the headlamp switch is in the OFF position.
^
Make sure the ignition switch is in the LOCK position.
1. Push down on the side marker lamp locking tab with a flat-bladed screwdriver and pull the lamp assembly outward.
2. Bulb socket from the side marker lamp by rotating it 1/4 turn counterclockwise.
3. Bulb from the socket by rotating it 1/4 turn counterclockwise.
Install or Connect
1. Bulb to the socket by rotating it 1/4 turn clockwise.
2. Bulb socket to the side marker lamp by rotating it 1/4 clockwise.
3. Align the side marker lamp and slide it rearward until the locking tab is secure.
^
Make sure that the wiring harness does not get pinched during installation of the side marker lamp.
