Hombre XS Space Cab L4-2.2L CPC (1997)
Alignment: Service and Repair
Preliminary Inspection
NOTE: Before making any adjustments affecting caster, camber, or toe-in, the following front end inspections should be made.
1. Check the tires for proper inflation pressure.
2. Inspect the hub and bearing assemblies for excessive wear.
3. Inspect the ball joints, tie rod ends, relay rods and idler arm.
4. Check the tires and wheels for runout.
5. Check the vehicle trim heights. Any corrections must be made before adjusting caster, camber, or toe-in.
6. Check the steering gear for looseness at the frame.
7. Inspect the shock absorbers for leaks or any noticeable noise.
8. Check the control arms or stabilizer shaft attachments for looseness.
9. Inspect the alignment equipment, and when using it follow the manufacturer's instructions.
10. Check the level of the vehicle. The vehicle must be on a level surface, fore, aft, and side to side.
