isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Bag Assembly Handling/Shipping/Scrapping|Page 4762 > < Air Bag Assembly Handling/Shipping/Scrapping|Page 4760
Page 1
background image

Air Bag: Description and Operation

The inflator module is located on the steering wheel hub. The inflator module consists of an inflatable bag and an inflator. An inflator is a canister of gas
generating material and an initiating device. During a crash that is of sufficient force to close both the supplemental restraint arming sensor and at least
one of the supplemental restraint discriminating sensors at the same time, a current flows through the loop. A current passing through the initiator ignites
the material that is in the inflator module. The gas produced from this reaction rapidly inflates the air bag.

There is a shorting bar on the inflator module side of the upper steering column connector. The shorting bar connects the supplemental restraint steering
wheel module coil to the inflator module. The shorting bar shorts the inflator module circuit then the upper steering column connector becomes
disconnected. This shorts the inflator in order to help prevent unwanted deployment of the air bag when servicing the inflator module or the steering
column. 

Air Bag Assembly Handling/Shipping/Scrapping|Page 4762 > < Air Bag Assembly Handling/Shipping/Scrapping|Page 4760