Hombre XS Space Cab L4-2.2L CPC (1997)
Impact Sensor: Service and Repair
Arming Sensor
REMOVAL PROCEDURE
CAUTION: Be very careful when handling the sensors during service procedures. Never strike the sensors. Never jar the sensors. These
actions could result in personal injury or improper operation of the Supplemental Restraint System (SRS). Carefully tighten all of the
sensors, and all of the mounting bracket bolts to ensure proper operation. Never power up the Supplemental Restraint System (SRS) when
any one of the sensors is not rigidly attached to the vehicle. An unattached sensor could be easily activated causing the deployment of the air
bag.
Supl Rst Arming Sensor
1. Disable the Supplemental Restraint System. Refer to Disabling the SRS.
2. Raise the vehicle.
3. Disconnect the Connector Position Assurance (CPA) lock from the retainer.
4. Disconnect the electrical connector.
Supl Rst Arming Sensor
5. Remove the mounting bolts.
6. Remove the sensor from the vehicle.
Important: Use the following repair procedures when the sensor mounting holes or fasteners are so badly damaged that the sensor may no longer be
properly mounted.
