isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Bag Control Module|Testing and Inspection > < Electrical Test Equipment|Page 4854
Page 1
background image

Air Bag Control Module: Description and Operation

Notice:  Do not open the DERM case for any reason. Touching the connector pins, or the soldered components may cause electrostatic discharge
damage. Replacement is the only way to repair a malfunctioning DERM.

The DERM performs the following functions in the Supplemental Restraint System (SRS):
^

Energy Reserve: The DERM maintains a 36 Volt Loop Reserve (36 VLR) energy supply in order to provide deployment energy when the
voltage is low or lost in a frontal crash.

^

Malfunction Detection: The DERM performs diagnostic monitoring of the Supplemental Restraint System (SRS) electrical components.

^

Malfunction Recording: The DERM provides SRS diagnostic trouble code information through a scan tool.

^

Driver Notification: The DERM controls the AIR BAG warning lamp. This warns the vehicle driver of SRS malfunctions.

^

Frontal Crash Recording: The DERM records the SRS status during a frontal crash.

The DERM is connected to the SRS wiring harness by a 24-way connector. When the DERM harness connector is disconnected, a shorting bar
connects the AIR BAG warning lamp to ground . This causes the AIR BAG warning lamp to light up whenever the ignition switch is at the RUN or
the START position.

Air Bag Control Module|Testing and Inspection > < Electrical Test Equipment|Page 4854