Hombre XS Space Cab L4-2.2L CPC (1997)
Supl Rst Arming Sensor
1. Install the sensor to the vehicle.
2. Install the sensor mounting bolts.
Tighten
Tighten the mounting bolts to 15 N.m (11 lb ft). Refer to Fastener Notice in General Information.
Supl Rst Arming Sensor
3. Connect the supplemental restraint arming sensor electrical connector.
Supl Rst Arming Sensor
4. Install the Connector Position Assurance (CPA) lock to the retainer.
5. Remove the safety stands.
6. Lower the vehicle.
7. Enable the Supplemental Restraint System (SRS). Refer to Enabling the SRS
