Hombre XS Space Cab L4-22L CPC (1997) Impact Sensor: Service and Repair
Supl Rst Arming Sensor
First Repair
1. Remove the stripped fastener.
2. Discard the stripped fastener.
3. Enlarge the mounting hole in the sensor to 9 mm (0.350 in).
4. Attach the sensor with the screw and the flanged hex nut.
Tighten
Tighten the screw to 15 N.m (11 lb ft). Refer to Fastener Notice in General Information.
Supl Rst Arming Sensor
Second Repair
1. Remove the stripped fastener.
2. Discard the stripped fastener.
3. Enlarge the 9 mm mounting hole in the sensor to 11 mm (0.433 in).
4. Enlarge the hole in the frame rail or cross-member to 9 mm (0.350 in).
5. Use the screw to attach the sensor.
Tighten
Tighten the screws to 15 N.m (11 lb ft). Refer to Fastener Notice in General Information.
INSTALLATION PROCEDURE