Hombre XS Space Cab L4-2.2L CPC (1997)
7. Remove the J 41364-A from the switch.
8. Install the wiring harness connectors to the switch.
9. Install the transmission control lever to the manual shaft with the nut.
Tighten
Tighten the control lever nut to 28 N.m (21 lb ft).
10. Lower the vehicle.
11. Connect the negative battery cable. Refer to Battery.
12. Inspect the switch for proper operation. The engine must start in the Park or Neutral positions only. If adjustment is required, loosen the switch
retaining bolts and rotate the switch slightly, then tighten the bolts and check the switch for proper operation.
