Hombre XS Space Cab L4-2.2L CPC (1997)
Steering Gear: Service and Repair
Removal and Installation
Check Valve
PROCEDURE
1. Remove the steering gear from vehicle, then remove the check valve (18) from the gear by prying from housing with a small screwdriver.
NOTE: Use care not to damage threads of housing when removing check valve.
2. Assemble the check valve (18) by using a 3/8-inch diameter piece of tubing 100 mm (4 inches) long to drive into housing.
3. Install the steering gear after installing the check valve in the steering gear.
Seals and Bearings