Hombre XS Space Cab L4-2.2L CPC (1997)
Install or Connect
1. Wiper motor assembly to the vehicle with three screws.
Tighten
^
Wiper motor assembly mounting screws to 7 N.m (62 lbs. in.).
2. Drive link socket onto the crank arm ball of the wiper motor assembly using J .
^
Lubricate the inside of the socket with white lithium grease or equivalent.
Important
^
Wiper transmission assembly must be assembled to the crank arm past the second detent so the seal is compressed to a maximum height of 25
mm (1 inch).
3. Electrical connector.
4. Cowl vent screen and grille.
5. Wiper arm and blade assemblies.
6. Negative battery cable.
Inspect
^
Perform System Check.