isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Intake Manifold|Specifications|Page 1665 > < Intake Manifold|Specifications|Page 1663
Page 3
background image

9. Disconnect the fuel pipes from the fuel rail. 

10. Remove the accelerator control cable from the throttle body. 
11. Remove the cruise control cable from the throttle body. 

12. Remove the spark plug wires from the spark plugs. 
13. Remove the spark plug wire harness retainer from the heater hose pipe and set aside the spark plug wire harness.

14. Working through the wheelhouse, remove the generator rear brace from the engine. Remove the nuts holding the brace to the intake stud and the

engine block. Remove the bolt holding the brace to the rear of the generator.

Intake Manifold|Specifications|Page 1665 > < Intake Manifold|Specifications|Page 1663