Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
4. Remove the camshaft timing chain, tensioner and camshaft sprocket at the same time.
5. Use the J 22888-20 in order to remove the crankshaft sprocket.
6. Remove the crankshaft sprocket key, If necessary.
Installation Procedure
Tools Required
-
J 5590 Crankshaft Gear Installer
Important: If any of the camshaft drive components are being replaced to correct a noise condition, replace all of the components in the camshaft
drive system.
1. Install the crankshaft sprocket key, if removed.
2. Install the crankshaft sprocket with the timing mark facing away from the engine, using J 5590 and a hammer.
Make sure that the crankshaft sprocket is seated against the crankshaft
