Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
5. Place the J 33023-A on the clutch rotor.
6. Install the J 41552 down into the inner circle of slots in the rotor.
Turn the J 41552 clockwise in the slots to engage the puller tangs with the rotor.
7. Hold the J 41552 in place and use a wrench to turn the center forcing screw against the J 33023-A to remove the clutch rotor and bearing
assembly.
Installation Procedure
Tools Required
-
J 33013-B Hub and Drive Plate Remover/Installer
-
J 33017 Pulley and Bearing Assembly Installer
