isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Seals and Gaskets, M/T|Service and Repair|Page 3706 > < Reverse Idler Gear|Testing and Inspection
Page 1
background image

Seals and Gaskets: Service and Repair

R Transmission Housing Oil Seal Replacement 

Removal Procedure 

Tools Required

J 36825 Output Shaft Oil Seal Remover
J 23907 Slide Hammer
 

1. Raise the vehicle. 
2. Remove the rear propeller shaft. 

3. Using J 36825 and J 23907 pry the seal out of the extension housing.

Installation Procedure 

Tools Required

J 36502-2A Output Shaft Seal Protector/Installer 
J 36502 Extension Housing Seal Installer
 

1. Position J 36502-2A over the output shaft.

Seals and Gaskets, M/T|Service and Repair|Page 3706 > < Reverse Idler Gear|Testing and Inspection