isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

On-Vehicle Service|Page 4305 > < Initial Inspection and Diagnostic Overview|Page 4302
Page 1
background image

Radio/Stereo: Service and Repair
On-Vehicle Service

Remove or Disconnect

1. The battery negative cable. Refer to Battery Disconnect Caution in Cautions and Notes.
2. The accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Interior Trim.
3. The HVAC control assembly. Refer to Control Assembly and Blower Switch in Heater, Ventilation and Air Conditioning.
4. The radio mounting screws.
5. The radio.
6. The radio nuts.
7. The instrument panel center compartment from radio.

Install or Connect

1. The instrument panel center compartment to radio.
2. The radio nuts.

Tighten
-

Radio mounting nuts to 2.8 N.m (25 lb in).

3. The radio.
4. The radio mounting screws.

Tighten
-

Radio to instrument panel mounting screws to 2.8 N.m (25 lb in).

5. The HVAC control assembly. Refer to Control Assembly and Blower Switch in Heater, Ventilation and Air Conditioning.
6. The accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Interior Trim.
7. The battery negative cable. Refer to Battery Disconnect Caution in Cautions and Notes.

-

Check circuit operation.

On-Vehicle Service|Page 4305 > < Initial Inspection and Diagnostic Overview|Page 4302