isuzu Workshop Repair Guides

Isuzu Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Tighten
Tighten the four T-25 Tort screws to 5 Nm (39 inch lbs.) in an X-pattern
.

6. Connect the negative battery cable.
7. Revise the tire calibration using the Scan Tool
8. Return to Diagnostic System Check.

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Diagrams > Page 18

< PREV PAGE NEXT PAGE >