Hombre XS Space Cab 2WD V6-4.3L (1998)
INSTALLATION PROCEDURE
1. Install the starter to the vehicle.
2. Install the inboard starter mounting bolt. Do not tighten.
3. Install the starter shims to the vehicle, if equipped.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the outboard starter mounting bolt.
Tighten
Tighten the starter mounting bolts to 43 Nm (32 ft. lbs.).
5. Connect the wires to the solenoid.
6. Connect the battery negative cable.