isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Power Steering Pressure Hose Replacement|Page 5058 > < Power Steering Pressure Hose Replacement|Page 5056
Page 2
background image

2. Connect the Power Steering gear return hose to the power steering gear. 

Tighten

Tighten the power steering gear return hose to the power steering gear to 30 N.m (22 lb ft).

3. Install the air cleaner assembly.
4. Raise the vehicle.

5. Connect the power steering gear return hose to the power steering pump.

Tighten

Tighten the power steering gear return hose to the power steering pump clamp to 2 N.m (18 lb in).

6. Remove drain pan from under the vehicle.
7. Install the steering Linkage shield, if equipped. 
8. Lower the vehicle.
9. Bleed the power steering system.

Power Steering Pressure Hose Replacement|Page 5058 > < Power Steering Pressure Hose Replacement|Page 5056