Hombre XS Space Cab 4WD V6-4.3L (1999)
Fluid Line/Hose: Service and Repair
Oil Cooler Line Replacement
Removal Procedure
1. Raise the vehicle.
2. Remove the stud and clip securing the cooling line to the engine.
3. Remove the nut and clip securing the oil cooler lines to the engine.
Important: Perform the following procedures when removing the retaining ring and cooler line from the quick connect fitting on the transmission.
4. Pull the plastic cap back from the quick connect fitting and down along the cooler line about two inches.
5. Using a bent-tip screwdriver, pull on one of the open ends of the retaining ring in order to rotate the retaining ring around the quick connect fitting
until the retaining ring is out of position and can be completely removed.
