i-290 2WD L4-29L (2008) Body and Frame Body Control Systems Body Control Module Diagrams
5. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 .
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
JST Connectors
JST Connectors
Tools Required
J-38125 Terminal Repair Kit
Removal Procedure
1. While depressing the lock, remove the connector from the component.